National Instruments AT E Series - Manual (Page 111)

Appendix A Specifications for AT-MIO-16E-1, AT-MIO-16E-2, and AT-MIO-64E-3
AT E Series User Manual A-6 ni.com
Non-FIFO mode waveform generation
1 channel ..................................800 kS/s (system dependent)
2 channel ..................................400 kS/s (system dependent)
Type of DAC ..........................................Double buffered, multiplying
FIFO buffer size .....................................2,048 samples
Data transfers ..........................................DMA, interrupts,
programmed I/O
DMA modes ...........................................Single transfer, demand transfer
Transfer Characteristics
Relative accuracy (INL)
After calibration...............................±0.3 LSB typ, ±0.5 LSB max
Before calibration ............................±4 LSB max
DNL
After calibration...............................±0.3 LSB typ, ±1.0 LSB max
Before calibration ............................±3 LSB max
Monotonicity ..........................................12 bits, guaranteed
after calibration
Offset error
After calibration...............................±1.0 mV max
Before calibration ............................±200 mV max
Gain error (relative to internal reference)
After calibration...............................±0.01% of output max
Before calibration ............................±0.5% of output max
Gain error
(relative to external reference)................+0% to +0.67% of output max,
not adjustable