National Instruments AT E Series - Manual (Page 146)

© National Instruments Corporation B-1 AT E Series User Manual
B
Optional Cable Connector
Descriptions
This appendix describes the connectors on the optional cables for the
AT E Series devices.
Figure B-1 shows the pin assignments for the 68-pin MIO connector.
This connector is available when you use the SH6868-EP or R6868 cable
assemblies with the AT-MIO-16E-1, AT-MIO-16E-2, AT-MIO-16E-10,
AT-MIO-16XE-10, AT-AI-16XE-10, or AT-MIO-16XE-50. It is also one of
the two 68-pin connectors available when you use the SH1006868 cable
assembly with the AT-MIO-16DE-10 or AT-MIO-64E-3.