National Instruments AT E Series - Manual (Page 141)

Appendix A Specifications for AT-MIO-16XE-50
AT E Series User Manual A-36 ni.com
Data transfers ..........................................DMA, interrupts,
programmed I/O
DMA modes ...........................................Single transfer
Triggers
Digital Trigger
Compatibility ..........................................TTL
Response .................................................Rising or falling edge
Pulse width .............................................10 ns min
RTSI
Trigger Lines ..........................................7
Calibration
Recommended warm-up time.................15 min
Calibration interval .................................1 year
External calibration reference.................>6 and <9.999V
Onboard calibration reference
Level ................................................5.000 V (±3 mV) (over full
operating temperature, actual
value stored in EEPROM)
Temperature coefficient...................±2 ppm/°C max
Long-term stability ..........................±15 ppm/
Bus Interface
Type ........................................................Slave
Power Requirement
+5 VDC (±5%) .......................................0.75 A
Power available at I/O connector............+4.65 VDC to +5.25 VDC
at 1 A
1,000 h