National Instruments AT E Series User Manual
Page 107
Appendix A
Specifications for AT-MIO-16E-1, AT-MIO-16E-2, and AT-MIO-64E-3
A-2
ni.com
Input signal ranges
Input coupling.........................................DC
Max working voltage
(signal + common mode) ........................Each input should remain
within ±11 V of ground
Overvoltage protection ...........................±25 V powered on,
± 15 V powered off
Inputs protected
100-pin devices................................ACH<0..63>, AISENSE,
AISENSE2
68-pin devices..................................ACH<0..15>, AISENSE
FIFO buffer size
AT-MIO-16E-1................................8,192 samples
AT-MIO-16E-2,
AT-MIO-64E-3................................2,048 samples
Data transfers ..........................................DMA, interrupts,
programmed I/O
DMA modes ...........................................Single transfer, demand transfer
Configuration memory size ....................512 words
Range
(Software
Selectable)
Input Range
Bipolar
Unipolar
20 V
±10 V
—
10 V
±5 V
0 to 10 V
5 V
±2.5 V
0 to 5 V
2 V
±1 V
0 to 2 V
1 V
±500 mV
0 to 1 V
500 mV
±250 mV
0 to 500 mV
200 mV
±100 mV
0 to 200 mV
100 mV
±50 mV
0 to 100 mV