National Instruments AT E Series - Manual (Page 175)

Index
© National Instruments Corporation I-5 AT E Series User Manual
AT-MIO-16XE-10 and AT-AI-16XE-10
(table), 4-12
AT-MIO-16XE-50 (table), 4-14
description (table), 4-5
digital I/O connections, 4-28
dither
enabling, 3-10
DMA channels
configuring, 2-3
PC AT 16-bit DMA channel assignment
map (table), 2-6
documentation
online library, D-1
drivers
instrument, D-1
software, D-1
dynamic characteristics
analog input
AT-MIO-16E-1, AT-MIO-16E-2 and
AT-MIO-64E-3, A-4
AT-MIO-16E-10 and
AT-MIO-16DE-10, A-14
AT-MIO-16XE-10 and
AT-AI-16XE-10, A-23, A-24
AT-MIO-16XE-50, A-32
analog output
AT-MIO-16E-1, AT-MIO-16E-2 and
AT-MIO-64E-3, A-7
AT-MIO-16E-10 and
AT-MIO-16DE-10, A-16
AT-MIO-16XE-10, A-25
AT-MIO-16XE-50, A-34
E
EEPROM storage of calibration constants, 5-1
environmental noise, avoiding, 4-55
equipment, optional, 1-5
example code, D-1
EXTREF signal
analog output reference connections, 4-27
analog output reference selection, 3-13
AT-MIO-16E-1, AT-MIO-16E-2 and
AT-MIO-64E-3 (table), 4-8
AT-MIO-16E-10 and AT-MIO-16DE-10
(table), 4-10
description (table), 4-5
EXTSTROBE* signal
AT-MIO-16E-1, AT-MIO-16E-2 and
AT-MIO-64E-3 (table), 4-8
AT-MIO-16E-10 and AT-MIO-16DE-10
(table), 4-10
AT-MIO-16XE-10 and AT-AI-16XE-10
(table), 4-12
AT-MIO-16XE-50 (table), 4-14
description (table), 4-6
timing connections, 4-30
F
field wiring considerations, 4-55
floating signal sources
description, 4-17
differential connections, 4-22
single-ended connections (RSE
configuration), 4-25
FREQ_OUT signal
AT-MIO-16E-1, AT-MIO-16E-2 and
AT-MIO-64E-3 (table), 4-9
AT-MIO-16E-10 and AT-MIO-16DE-10
(table), 4-11
AT-MIO-16XE-10 and AT-AI-16XE-10
(table), 4-13
AT-MIO-16XE-50 (table), 4-15
description (table), 4-8
waveform generation timing
connections, 4-50
frequently asked questions, D-1
See also questions about AT E series
boards
fuse, 4-6