Table 2-1. pc at i/o address map – National Instruments AT E Series User Manual
Page 24
Chapter 2
Installing and Configuring the Device
2-4
ni.com
The following tables provide information concerning possible conflicts
when configuring the AT E Series device.
Table 2-1. PC AT I/O Address Map
I/O Address Range (Hex)
Device
100 to 1EF
—
1F0 to 1F8
IBM PC AT Fixed Disk
200 to 20F
PC and PC AT Game Controller, reserved
210 to 213
PC-DIO-24 (default)
218 to 21F
—
220 to 23F
Previous generation of AT-MIO devices
(default)
240 to 25F
AT-DIO-32F (default)
260 to 27F
Lab-PC/PC+ (default)
278 to 28F
AT Parallel Printer Port 2 (LPT2)
279
Reserved for Plug and Play operation
280 to 29F
WD EtherCard+ (default)
2A0 to 2BF
—
2E2 to 2F7
—
2F8 to 2FF
PC, AT Serial Port 2 (COM2)
300 to 30F
3Com EtherLink (default)
310 to 31F
—
320 to 32F
ICM PC/XT Fixed Disk Controller
330 to 35F
—
360 to 363
PC Network (low address)
364 to 367
Reserved
368 to 36B
PC Network (high address)
36C to 36F
Reserved
370 to 366
PC, AT Parallel Printer Port 1 (LPT1)