National Instruments AT E Series - Manual (Page 126)

Appendix A Specifications for AT-MIO-16XE-10 and AT-AI-16XE-10
© National Instruments Corporation A-21 AT E Series User Manual
AT-MIO-16XE-10 and AT-AI-16XE-10
Analog Input
Input Characteristics
Number of channels ............................... 16 single-ended or 8 differential
(software-selectable)
Type of ADC.......................................... Successive approximation
Resolution .............................................. 16 bits, 1 in 65,536
Maximum sampling rate ........................ 100 kS/s guaranteed
Input signal ranges
Input coupling ........................................ DC
Maximum working voltage .................... Each input should remain within
±11 V of ground
Overvoltage protection........................... ±25 V powered on,
±15 V powered off
Inputs protected............................... ACH<0..15>, AISENSE
Range
(Software Selectable)
Input Range
Bipolar Unipolar
20 V ±10 V —
10 V ±5 V 0 to 10 V
5 V — 0 to 5 V
4 V ±2 V —
2 V ±1 V 0 to 2 V
1 V ±500 mV 0 to 1 V
500 mV — 0 to 500 mV
400 mV ±200 mV —
200 mV ±100 mV 0 to 200 mV
100 mV — 0 to 100 mV