At-mio-16xe-50, Analog input input characteristics – National Instruments AT E Series User Manual
Page 135
Appendix A
Specifications for AT-MIO-16XE-50
A-30
ni.com
AT-MIO-16XE-50
Analog Input
Input Characteristics
Number of channels................................16 single-ended or 8 differential
(software-selectable)
Type of ADC ..........................................Successive approximation
Resolution ...............................................16 bits, 1 in 65,536
Maximum sampling rate .........................20 kS/s guaranteed
Input signal ranges
Input coupling.........................................DC
Maximum working voltage
(signal + common mode) ........................The average voltage of each
differential pair should remain
within ±8 V of ground
Overvoltage protection ...........................±25 V powered on,
±15 V powered off
Inputs protected ...............................ACH<0..15>, AISENSE
FIFO buffer size......................................512 samples
Range
(Software Selectable)
Input Range
Bipolar
Unipolar
20 V
±10 V
—
10 V
±5 V
0 to 10 V
5 V
—
0 to 5 V
2 V
±1 V
—
1 V
—
0 to 1 V
200 mV
±100 mV
—
100 mV
—
0 to 100 mV