Ricoh AP4510 - Manual (Page 107)

Loading Paper and Other Media
33
3
Loading Paper and Other Media
Loading Paper in the Paper
Tray
Loading Paper without Changing the
Paper Size
This section describes instructions for
loading paper whose size and feed di-
rection is already set in the standard
paper tray. If you want to change the
paper size or feed direction, see p.34
“Changing Paper Size of the Paper
Tray”.
Reference
For more information on the size
and feed direction of paper that
can be loaded into the tray, see
p.25 “Paper Sizes”.
AAAA
Slide the paper tray out until it
stops.
BBBB
Remove the rear guide by press-
ing the sides of it.
CCCC
Align all four sides of the paper
stack and load it into the tray with
the print side up.
Important
❒ Confirm that the top of the stack
is not higher than the limit mark
inside the tray.
Note
❒ If there is space between the
guides and the stack, move the
guides to fit to the stack.
1
2
1