Ricoh AP4510 User Manual

Page 231

Advertising
background image

iii

This manual contains detailed instructions on configuring the machine as a net-
work printer. Read the section appropriate to your network environment on
how to configure the machine correctly.

Important

❒ The procedures written in this manual assume that you are a network admin-

istrator. If you are not, be sure to consult your network administrator before
configuration.

Reference

For more information about configuring the Network Interface Board with
the control panel, see the Setup Guide.

❖

❖

❖

❖ Features

• Support for 100BASE-TX, 10BASE-T and IP over 1394
• The Network Interface Board is compatible with NetWare (IPX/SPX,

TCP/IP), Windows NT 4.0 (TCP/IP, NetBEUI

*1

, IPP

*2

), Windows 2000

(TCP/IP, NetBEUI

*1

, IPP

*2

), Windows 95/98/Me (TCP/IP, NetBEUI

*1

,

IPP

*2

), UNIX (TCP/IP) and Macintosh (AppleTalk) protocols. This allows

you to use the machine in a network that uses different protocols and op-
erating systems.

• A computer used as a dedicated print server is not required because the

Network Interface Board can be configured as a NetWare print server.

• The Network Interface Board can connect the machine to the network

without requiring its own power supply because the Network Interface
Board is installed inside the machine.

*1

To use NetBEUI, use the SmartNetMonitor for Client port.

*2

IPP (Internet Printing Protocol) is a protocol for printing via the Internet.

NetWare (Server)

Windows NT (Server)

Windows 2000,

Windows 95/98/Me

Macintosh

NetWare
(Client)

Windows NT

Windows 2000

UNIX

Advertising