Ricoh AP4510 - Manual (Page 403)

Specifying the Device Option
27
1
Punch
Select the punch position for the output.
Limitation
❒ Before executing punch, make sure the number of collated set, the output tray
for punch and the number of punch holes are specified.
❒ When using this option, the optional Finisher unit is required.
❒ When printing with this option, be sure to specify the optional Finisher using
the value of “finisherproof” or “finishershift”, for example “outbin=finisher-
proof”. For more information about the optional Finisher unit, see
⇒ p.22
“Output Tray”
Note
❒ Available punch positions may vary depending the type of installed output
tray. For more information about punch, see the Printer Reference.
punch =value of punch position
*1 ***LAND and ***PORT will result the same.
Punch Position Value
Left
leftport *1
leftland *1
Right
rightport *1
rightland *1
Top
topport *1
topland *1
Not Punch off