Ricoh AP4510 - Manual (Page 212)

Appendix
138
7
Moving and Transporting the Printer
R CAUTION:
Note
❒ The printer weighs approximately 63 kg (138.9 lb.).
❒ Repack the printer in its original packing materials for transporting.
Important
❒ Be sure to disconnect all cables from the printer before transporting it.
❒ The printer is a precision piece of machinery. Take care to avoid damage dur-
ing shipment.
Moving the Printer
R CAUTION:
Moving the printer in a short distance
AAAA
Be sure to check the following points:
• The power switch is turned off.
• The power cable is unplugged from the wall outlet.
• The interface cable is unplugged from the printer.
BBBB
If the external options are installed, remove them.
CCCC
Lift the printer with two people by holding the handles, and then move it
horizontally to the place where you want to install it.
• When moving the machine, each person should hold the handles that are
located on opposite sides, and then lift it slowly. Lifting it carelessly or drop-
ping it may cause an injury.
• When you move the printer, remember to unplug the power cord from the
wall outlet to avoid a fire or an electric shock.
• When you pull out the plug from the socket, grip the plug, not the cord, to
avoid damaging the cord and causing a fire or an electric shock.
• When lifting the machine, use the grips on both sides. Otherwise the printer
could break or cause an injury if dropped.
• Before moving the machine, unplug the power cord from the wall outlet. If
the cord is unplugged abruptly, it could become damaged. Damaged plugs
or cords can cause an electrical or fire hazard.