Ricoh AP4510 - Manual (Page 197)

Host Interface Menu
123
6
Network Setup
❖ ❖ ❖ ❖ IP Address
You can set the IP Address.
Note
❒ Default: 011.022.033.044
❖ ❖ ❖ ❖ Subnet Mask
You can set the Subnet Mask.
Note
❒ Default: All zero
❖ ❖ ❖ ❖ Gateway Address
You can set the Gateway Address.
Note
❒ Default: All zero
❖ ❖ ❖ ❖ Network Boot
You can set how the Network Interface Board acquires
TCP/IP settings.
Note
❒ Default: None
❖ ❖ ❖ ❖ Frame Type (NW)
You can set the Frame Type for NetWare.
Note
❒ Default: Auto
❖ ❖ ❖ ❖ Active Protocol
You can set the active protocol.
TCP/IP, NetWare, NetBEUI, AppleTalk
Reference
Default: Active
Network Setup
❖ ❖ ❖ ❖ Ethernet
You can select the speed of the network that the printer is con-
nected to.
Auto, 10 Mbps., 100 Mbps.
Note
❒ Default: Auto
Reference
For more information about Network Setup, see “Configuring
the Printer for the Network with the Control Panel” in the Setup
Guide.
Menu Description