Staple – Ricoh AP4510 User Manual
Page 404
UNIX Configuration
28
1
Staple
Select the staple position for the output.
Limitation
❒ Before executing staple, make sure the number of the collated sets and the
output tray for staple are specified.
❒ When using this option, the optional Finisher Unit is required.
❒ When printing with this option, be sure to specify the optional Finisher Unit
using the value of “finishershift”. For more information about the optional
Finisher Unit, see p.22 “Output Tray” .
staple=value of staple position
The following sample shows how to print with staple on the upper left using
Tray Finisher Unit 1 (host name : nphost, file name : file1).
• rsh
% rsh nphost print staple=lefttop,outbin=finishershift <
file1
• rcp
% rcp file1 nphost:staple=lefttop,outbin=finishershift
• ftp
ftp> put file1 staple=lefttop,outbin=finishershift
Staple Position
Value
Left Top
lefttop
Right Top
righttop
Not Staple
off