Ricoh AP4510 User Manual
Page 144
Troubleshooting
70
5
Low: Staples
The staples in the optional
Finisher SR730 is almost run
out.
Prepare a new staple car-
tridge.
Low: Toner
The toner is almost run out.
Prepare a new toner bottle.
Malfunction: Duplex Unit
An error has occurred in the
Duplex Unit.
Reinstall the Duplex Unit. If
the message appears again,
call your sales or service rep-
resentative.
Malfunction: Finisher
An error has occurred in the
optional Finisher SR730.
Reinstall the Finisher. If the
message appears again, call
your sales or service repre-
sentative.
Malfunction: LCT
An error has occurred in the
optional Large Capacity Tray.
Reinstall the Large Capacity
Tray. If the message appears
again, call your sales or serv-
ice representative.
Malfunction: Staple Unit
An error has occurred in the
staple unit in the Finisher
SR730.
Reinstall the staple unit. If the
message appears again, call
your sales or service repre-
sentative.
Malfunction: Tray #
An error has occurred in the
indicated tray.
#: tray number
First, turn the power switch
off and then on. Reinstall the
tray. If the message appears
again, call your sales or serv-
ice representative.
Mismatch: Paper Size
The paper size setting of the
tray differs from that of actual
paper size in the tray.
Load paper of the indicated
paper size into the paper tray
being used. See p.25 “Paper
and Other Media Supported
by This Printer”.
Mismatch: Paper Size and
Type
The paper size and type set-
ting of the tray differs from
that of actual paper type in the
tray.
Load paper of the indicated
paper size and type into the
paper tray being used. See
p.25 “Paper and Other Media
Supported by This Printer”.
Mismatch: Paper Type
The paper type setting of the
tray differs from that of actual
paper type in the tray.
Load paper of the indicated
paper type into the paper tray
being used. See p.25 “Paper
and Other Media Supported
by This Printer”.
Nearly Full: Waste Toner
The waste toner bottle is al-
most full of toner dust.
Call your sales or service rep-
resentative.
No Paper
There is no paper in the tray.
Load paper in the tray. See
p.33 “Loading Paper and Oth-
er Media”.
Messages
Description
Solution