Ricoh AP4510 User Manual
Page 327
Message List
87
6
Exit pserver
(In print server mode) Exits the print server
because the necessary print server settings
have not been made.
Frametype =<frame type name>
The <frame type name> is configured to be
used on NetWare.
httpd start.
An httpd has started.
inetd start.
An inetd has started.
<interface> started with IP: <IP address>
<IP address> has been set for <Interface> and
<Interface> started.
<Interface>: Subnet overlap.
Subnet from Netmask and the IP address you
tried to set for <Interface> overlap the subnet
for another interface.
Set Subnet so that it does not overlap with an-
other interface.
IPP cancel-job: permission denied.
The printer could not authenticate the name of
the user attempting to cancel a job.
ipp disable.
Printing with ipp is disabled.
ipp enable.
Printing with ipp is enabled.
IPP job canceled. jobid=%d.
The spooled job has been canceled due to an
error or by user request.
LeaseTime=<lease time>(sec), Renew-
Time=<renew time>(sec).
The resource lease time that was received from
the DHCP server is <lease time> in seconds.
The renewal time is also <renew time> in sec-
onds.
Login to fileserver <file server name>
(<IPX|IP>,<NDS|BINDERY>)
(In print server mode) Logged in to the file
server with NDS or BINDERY mode.
multid start.
Data transmission service for multiprotocols
has started.
nbstart start. (NetBEUI)
The service for NetBEUI protocol stack setting
has started.
NBT Registration Broadcast(<NetBIOS
name>)
Use a local broadcast to map <NetBIOS name>
with the IP address.
nbtd start.
A nbtd (NetBIOS over TCP/IP Daemon) has
started. (Available only in DHCP mode)
NetBEUI Computer Name =<computer
name>
The NetBEUI Computer Name is defined as
<computer name>.
nmsd start. (NetBEUI)
A nmsd (Name Server Daemon) has started.
npriter start. (NetWare)
(In remote printer mode) NetWare service has
started.
nwstart start. (NetWare)
The service for NetWare protocol stack setting
has started.
Message
Description and Solutions