Ricoh AP4510 - Manual (Page 353)

Setting up Options
9
1
Punch
Use this function to have the output punched.
The following table shows the tabs or menus where you can select this function.
You can select the following items. The following items may vary depending on
the operating system you are using.
Limitation
❒ To use this function, the optonal Finisher 3000 with the punch option must be
installed on the printer.
Windows 95/98/Me
❖ ❖ ❖ ❖ Off
Disables punching.
❖ ❖ ❖ ❖ Left 2 (3) *1
The punch holes are placed on the left side.
❖ ❖ ❖ ❖ Right 2 (3) *1
The punch holes are placed on the right side.
❖ ❖ ❖ ❖ Top 2 (3) *1
The punch holes are placed parallel on the right side.
*1 Punching positions in the list box vary depending on the type of punch unit selected
on the [Accessories] tab.
Windows 2000, Windows NT 4.0, Macintosh
Limitation
❒ Depending on the application, punching may not work properly.
❖ ❖ ❖ ❖ Off
Disables punching.
❖ ❖ ❖ ❖ Left
The punch holes are placed on the left side.
Windows 95/98/Me [Punch] on the [Setup] tab.
Windows 2000 [Printer Features] on [Advanced...] on the [Paper/Quality] tab
in the Printing Preferences Properties.
Windows NT 4.0 [Printer Features] on [Document Options] on the [Advanced]
tab.
Macintosh [Punch:] on [Printer Specific Options] in the print dialog
box.