Ricoh AP4510 - Manual (Page 193)

System Menu
119
6
Edge Smoothing You can set whether Edge Smoothing is enabled. When it is on,
jagged lines appear more smoothly. Set it to off when the print im-
age contains fine gradation in tone.
• On
• Off
Note
❒ Default: Off
❒ If "Toner Saving" is "On", "Edge Smoothing" is ignored even if
it is "On".
Resolution You can set the print resolution in dots per inch.
❖ ❖ ❖ ❖ PCL
300 dpi, 600 dpi
❖ ❖ ❖ ❖ PS
300 dpi, 600 dpi
❖ ❖ ❖ ❖ TIFF
200 dpi, 300 dpi, 400 dpi, 600 dpi
Note
❒ Default: 600 dpi
Toner Saving You can select whether or not Toner Saving is enabled.
• On
• Off
Note
❒ Default: Off
❒ If "Toner Saving" is "On", "Edge Smoothing" is ignored even if
it is "On".
Spool Printing When "On" is selected, the entire print data is spooled to the Print-
er Hard Disk before printing.
• On
• Off
Note
❒ Default: Off
Limitation
❒ "Spool Printing" does not appear unless the optional Printer
Hard Disk is installed.
Menu Description