Ricoh AP4510 - Manual (Page 165)

Adding Staples
91
5
Adding Staples
When “Add Staples” appears on the
panel display, the staples are almost
empty. Follow these steps to replace
the staple refill with a new one.
Note
❒ After adding the staple refill, sta-
ples might not be ejected for the
first few times.
Finisher SR720
AAAA
Slide the stack unit of the Finish-
er SR720 out until it stops.
BBBB
Remove the staple cartridge.
CCCC
Remove the empty refill case
(white).
DDDD
Add a new refill and align the ar-
rows on the refill case and the car-
tridge, and then push the refill
case in until it clicks.
EEEE
Pull out the ribbon from the bot-
tom of the refill case.
TAPY670E
TAPY680E
TAPY690E
TAPY700E
TAPY710E