Ricoh AP4510 - Manual (Page 283)

Quick Setup Using the NIB Setup Tool Wizard
43
4
NNNN
Type the name of the printer into the [Printer Name] box, and the name of the
print queue into the [Print Queue Name] box.
The default setting for Printer Name is “Print Server Name” followed by “_1”
and for Print Queue Name is “Print Server Name” followed by “_Q” (quota-
tion marks are not included). You can change them if necessary.
OOOO
If you have selected the NDS mode, type the volume of the print queue into
the [Queue Volume] box.
Clicking [Browse], you can select one of those shown in the [Browse] dialog
box.
PPPP
Click [Next >].
A dialog box to acknowledge the printing environment appears.
QQQQ
After checking the environment, click [Next >].
If you want to change the settings, click [< Back], and then make the settings
again.
Clicking [Next >], the NIB Setup Tool automatically creates the Print Server,
the Printer, and the Print Queue in the NetWare network.
RRRR
After the confirmation dialog box appears, select [Quit] and click [Finish] to
exit the NIB Setup Tool.