Ricoh AP4510 - Manual (Page 271)

Using SmartNetMonitor for Client
31
3
Installing SmartNetMonitor for Client
For more information about installing SmartNetMonitor for Client, see the Setup
Guide.
After the installation is complete, configure the printer port with SmartNetMon-
itor for Client.
⇒ p.32 “Setting Up the Printer Driver”
Deleting the port
The following procedure allows you to delete the printer port. If you want to de-
lete the port which is currently used in Windows, switch the port to another such
as “FILE”, then delete it. For more information about SmartNetMonitor for Cli-
ent, see SmartNetMonitor for Client Help.
AAAA
From the [Printers] window, click the icon of the printer which uses Smart-
NetMonitor for Client to print. On the [File] menu, click [Properties].
BBBB
Click the [Ports] tab, and then make sure that the SmartNetMonitor for Cli-
ent port is shown in the [Print to the following port] box.
Remember the port name because this port should be deleted later.
CCCC
From the [Print to the following port] box, select [FILE].
DDDD
Click [Apply].
The port which is currently in use is changed.
EEEE
Click [Delete Port].
FFFF
After the confirmation message appears, click [Yes].
The port is deleted.
GGGG
Click [OK] to close the printer properties.
Uninstalling SmartNetMonitor for Client
Preparation
Before uninstalling SmartNetMonitor for Client, make sure that:
• The port settings dialog box is closed.
• No printer is using the SmartNetMonitor for Client port as a printer port.
• You have performed login with the same user authority as that used to in-
stall SmartNetMonitor for Client.
AAAA
Open [Control Panel], and then double-click the [Add/Remove Programs] icon.
BBBB
On the [Install/Uninstall] tab, click [SmartNetMonitor for Client] and click [Add/Re-
move]
.