Ricoh AP4510 - Manual (Page 265)

25
3. Windows NT 4.0
Configuration
Configuring Windows NT 4.0
Printing without a Print Server
The following procedure describes how to configure Windows NT 4.0 to use the
machine on a network without a Windows 2000, Windows NT Server, Windows
NT Workstation or NetWare based print server.
Consult your network administrator about which of the three protocols is appropriate.
2. Configure the chosen protocol
3. Select the appropriate software
4. Install the software and set the printer driver port
1. Specify the protocol to use
TCP/IP
"Using SmartNetMonitor
for Client "
SmartNetMonitor
for Client
"Configuring TCP/IP and IPP for Printing"
"Configuring NetBEUI
for Printing"
If using the printer...
indicates topics explained in this document
IPP NetBEUI