Ricoh AP4510 - Manual (Page 415)

5
❒ Set the Subnet Masks for the 1394
Interface Unit and the Ethernet in-
terface so they do not overlap.
Note
❒ The supported protocols are IPP
and LPR.
• To use IPP, see P.5 “Installing the
Printer Driver”.
• To use LPR, see the Network
Printing Guide.
❒ The maximum number of simulta-
neous print requests when con-
necting with IP over 1394 includes
the print requests from the Ether-
net interface. For more informa-
tion, see the Network Printing
Guide.
Installing the Printer Driver
You need the Microsoft Windows Me
CD-ROM for the installation.
To find out whether the Windows Me
CD-ROM supplied by another sup-
plier includes the IPP driver, contact
the each supplier.
A
Insert the Windows Me CD-ROM
into the CD-ROM drive.
B
Auto Run will start the Windows
Millennium CD-ROM.
C
Click [Browse This CD].
A window showing the contents of
the CD-ROM appears.
D
Double-click the [add-ons] folder.
E
Double-click the [Ipp] folder.
For more information about in-
stalling the IPP Client, see the [Ipp]
file in the [Ipp] folder.
F
Restart the computer and remove
the Windows Me CD-ROM from
the CD-ROM drive.
G
Click [Start], point to [Settings],
and then click [Printers].
H
Double-click [Add Printer].
The "Add Printer Wizard" starts.
I
Click [Next>].
J
Select the [Network Printer] check
box, and then click [Next>].
K
In [Network path or queue name],
type [http://<IP address of printer>/
printer]
for the printer IP address
and the port number, and then
click [Next>].
L
Click [Next>].
M
Click [Have Disk…].
The "Install From Disk" dialog box
appears.
N
Insert the CD-ROM labeled
"Printer Drivers and Utilities"
that comes with the printer.
O
Click [Browse…].
P
Select the CD-ROM drive from
the drop-down list in the [Drives]
box.
Q
Select the folder containing the
printer driver you want to install,
and then click [OK].
R
Click [OK].
S
Select the computer you use, and
then click [Next>].
T
Change [Printer name] as necessary,
and then click [Next>].
U
Check the configuration page, se-
lect [No], and then click [Finish].
Installation starts.
V
Restart Windows.
The printer driver installation is
complete.