Ricoh AP4510 User Manual
Page 412
Advertising
2
D
Remove the two screws locking
the printer board.
The screws are needed to lock the
printer board afterwards.
E
Hold the handle, and carefully
pull out the printer board.
F
Put the printer board on a flat sur-
face.
G
Remove the two screws locking
the 1394 Interface Unit cover.
The screws are needed to lock the
1394 Interface Unit afterwards.
H
Attach the 1394 Interface Unit to
the slot. Confirm that the unit is
firmly connected to the printer
board.
I
Lock the 1394 Interface Unit cover
with the two screws you removed
in step
J
Align the printer board with the
top and bottom rails in the print-
er, and then insert the printer
board slowly until it stops.
Advertising