Ricoh Priport JP5000 - Manual (Page 107)

Printing Using The Optional Document Feeder
85
2
E
Press the
{{{{
Enter
}}}} key.
F
Enter the desired number of
prints for the second original
with the Number keys.
G
Press the
{{{{
Enter
}}}} key.
Note
❒ Repeat steps F and G for each
original.
❒ The number of prints for up to
20 originals can be stored.
H
Press the [OK] key.
I
Set your originals face up in the
document feeder.
Note
❒ The originals are fed from the
top of the stack. Make sure that
the originals are set in the cor-
rect sequence with the first orig-
inal on the top.
J
Press the
{{{{
Start
}}}} key.
K
Check the image position of the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the [Image
=
] key (see
⇒
P.25 “Adjusting
Print Image Position”).
L
Press the
{{{{
Auto Cycle
}}}} key.
Note
❒ In Auto Cycle mode, printing
starts automatically after a trial
print is delivered.
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES020N
Program Clear Modes
Auto Cycle
Proof
Print
Enter
Start
Clear/Stop
TPES040N
TPEH350E
Program Clear Modes
Auto Cycle
Proof
Print
Enter
Start
Clear/Stop
TPES050N
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES150N