Ricoh Priport JP5000 - Manual (Page 77)

Auto Class Mode— Making Variable Numbers Of Prints From The Same Original Using Stored Data
55
1
key and press the [Cancel]
key.
❒ Repeat steps A and B until
you have finished selecting
all the desired classes.
E
Press the [OK] key.
F
Set one original on the exposure
glass (contact glass) or in the op-
tional document feeder.
G
Press the
{{{{
Start
}}}} key.
H
Check the image position of the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the [Image
=
] key (see
⇒
P.25 “Adjusting
Print Image Position”).
I
Make your prints.
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES050N