When the prints are not delivered in a neat stack, 4when the prints are not delivered in a neat stack – Ricoh Priport JP5000 User Manual
Page 206
Advertising
What To Do If Something Goes Wrong
184
4
When The Prints Are Not Delivered In A
Neat Stack
If you use small size paper, prints
might not be delivered in a neat stack.
In this case, follow the steps below.
A
Lower the end plate a little. While
holding the end plate, lift the an-
gle adjustment screw.
B
Adjust the end plate angle by
turning the screw clockwise or
counterclockwise.
TPEH320E
TPEH240E
Advertising