Ricoh Priport JP5000 - Manual (Page 275)

Auto Reset
23
1
Auto Reset
If you do not operate the machine for a certain period after printing, the machine
will return to the initial condition. This function is called “Auto Reset”.
Note
❒ You can change the time the machine waits before Auto Reset starts. See “Au-
to Reset” on p.141 “1. System”.
❒ The machine will not enter Auto Reset in such cases as follows:
• If there is no ink
• If originals or paper are jammed
• If the machine is making master or printing
• If the machine is printing the second page of a combined print job
• If the machine is loading original images in memory
• If there is no paper
• If there is no master
• If the master eject unit is full
• If originals are left on the document feeder
• If the “cover open” message is displayed
• If the settings have been reset to their defaults
• If you select “Off” for “Auto Reset” with the user tools