Ricoh Priport JP5000 - Manual (Page 272)

Operation
20
1
IIII
Press the
{{{{Proof}}}} key and check the
image density and the image po-
sition on the proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the [Image
= = = =]
key. See p.24 “Adjusting the Po-
sition of Printed Images”.
❒ If the image density is slightly
dark or light, adjust the image
density using the
{{{{W W W W}}}}{{{{V V V V}}}} keys.
See p.25 “Adjusting the Image
Density of Prints”.
JJJJ
Enter the number of prints re-
quired with the number keys.
Note
❒ To change the number entered,
press the
{{{{Clear/Stop}}}} key and en-
ter the new number.
KKKK
Press the
{{{{Print}}}} key.
Note
❒ To stop the machine during a
m u l t i - p r i n t r u n , p r e s s t h e
{{{{Clear/Stop}}}} key.
❒ To return the machine to the ini-
tial condition after printing,
press the
{{{{Clear Modes/Energy
Saver
}}}} key.
Removing Prints
AAAA
Pull the front paper delivery side
plate down towards you to open.
Note
❒ You cannot open the rear paper
delivery side plate.