Ricoh Priport JP5000 - Manual (Page 95)

Program—Storing Your Print Settings In Memory
73
1
Recalling A Program
A
Press the
{{{{
Program
}}}} key.
B
Make sure that [Recall] is selected.
C
Press the [OK] key.
Note
❒ Programs that have been stored
beforehand are represented by a
number.
D
Select the program number you
want to recall with the
[
← ← ← ←
] , [
→ → → →
] ,
{~}, or {{{{} } } }}}}} key.
Note
❒ You can also select the program
number with the Number keys.
E
Press the [OK] key.
F
Set your original on the exposure
glass (contact glass) or in the op-
tional document feeder.
G
Press the
{{{{
Start
}}}} key.
Protecting A Program
If you want to prevent someone from
writing over your program, do the
following procedure.
A
Press the
{{{{
Program
}}}} key.
B
Select [Protect] with the [
← ← ← ←
] or
{{{{~ ~ ~ ~}}}}
key.
C
Press the [OK] key.
Note
❒ Already protected program
numbers are shown with a
black background (e.g.
A).
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES190N
TPES530E
Program Clear Modes
Auto Cycle
Proof
Print
Enter
Start
Clear/Stop
TPES050N
Program Clear Modes
Auto Cycle
Proof
Print
Enter
Start
Clear/Stop
TPES190N
TPES550E