Ricoh Priport JP5000 - Manual (Page 276)

Operation
24
1
Adjusting the Position of Printed Images
Use the following procedure to adjust
the position of print images as re-
quired.
* Paper feed direction
Limitation
❒ For 308 mm, 12.2"-width paper,
you can only adjust the position of
the print image 5 mm, 0.2" up or
down.
Note
❒ When the main switch is turned
off, the position returns to the de-
fault.
AAAA
Press the [Image
= = = =] key.
Note
❒ You can skip step A and adjust
the image position directly by
pressing the
{{{{~ ~ ~ ~}}}}, {{{{} } } }}}}}, {{{{| | | |}}}},
and
{{{{{ { { {}}}} keys.
BBBB
Adjust image position using the
{{{{~ ~ ~ ~}}}}, {{{{} } } }}}}}, {{{{| | | |}}}}, and {{{{{ { { {}}}} keys.
Note
❒ When you shift the image for-
ward, leave a 10mm, 0.4" mar-
gin at the leading edge. If there
is no margin, paper might wrap
around the drum and cause a
misfeed.
❒ The {{{{~ ~ ~ ~}}}} and {{{{} } } }}}}} keys shift the
image up to 15mm, 0.6" each
way in 0.5mm, 0.02" steps.
❒ The {{{{| | | |}}}} and {{{{{ { { {}}}} keys shift the
image up to 10mm, 0.4" each
way in 0.5mm, 0.02" steps.
CCCC
Press the [OK] key.
DDDD
Press the
{{{{Proof}}}} key to check the
image position.
GRPOSI0E