Ricoh Priport JP5000 - Manual (Page 377)

125
2. Optional Functions
Optional Document Feeder
Insert a stack of originals in the docu-
ment feeder. It will be fed automati-
cally.
Originals
Placing the following originals in the
document feeder might cause mis-
feeds or damage to the originals.
Place the following kinds of originals
on the exposure glass:
• Originals heavier than 128g/m
2 , 34 lb
• Originals lighter than 52g/m 2 , 14 lb
• Originals smaller than 148mm
×
210mm, 5.9"
× 8.3"
• Originals larger than 297mm
×
864mm, 11.6"
× 34.0"
• Stapled or clipped originals
• Perforated or torn originals
• Curled, folded, or creased origi-
nals
• Originals with any kind of coating,
such as thermal fax paper, art pa-
per, aluminum foil, carbon paper,
or conductive paper
• Bound originals such as books
• Damaged originals
• Originals with glue on them
• Pasted originals
• Originals written in pencil
• Thin originals that are a little stiff
• Originals with index tabs
• Transparent originals such as OHP
transparencies or translucent pa-
per
The following original sizes placed in
the document feeder can be detected.
Reference
For the original sizes placed on the
exposure glass can be detected, see
p.13 “Originals”.
Note
❒ Place originals after correction flu-
id and ink have completely dried.
Not taking this precaution could
mark the exposure glass and cause
marks to be printed.
For standard printing functions, set
originals as shown below.
If the original is placed in a different
direction from the print paper, the
machine automatically rotates the
original image by 90
° to match the
print paper direction.
You cannot place originals of differ-
ent sizes at the same time.
Metric version A3 L, B4 L, A4 KL,
B5
KL, A5KL
Inch version 11" × 17" L, 8 1 /
2
" × 14"
L, 8 1 /
2
" × 11"KL, 5 1 /
2
"
× 8 1 /
2
" KL
R
R
GRSETT1E