Ricoh Priport JP5000 - Manual (Page 71)

Auto Cycle—Making Master And Prints At One Stroke
49
1
Auto Cycle—Making Master And Prints At
One Stroke
Use the
{
Auto Cycle
} key to process
masters and make prints at one
stroke.
Note
❒ When you use the optional docu-
ment feeder, it is not necessary to
place originals one by one. All
originals are fed and prints are
completed after you press the
{
Start
} key.
A
Set your original on the exposure
glass (contact glass) or in the op-
tional document feeder.
Note
❒ You can set up to 30 originals
into the optional document
feeder.
B
Enter the number of prints re-
quired with the Number keys.
C
Press the
{{{{
Start
}}}} key.
D
Check the image position of the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the [Image
=
] key (see
⇒
P.25 “Adjusting
Print Image Position”).
E
Press the
{{{{
Auto Cycle
}}}} key.
Note
❒ If you press the {
Auto Cycle
}
key, you cannot make proof
prints by pressing the
{
Proof
}
key.
F
Press the
{{{{
Print
}}}} key.
Note
❒ Repeat steps A through C until
all originals are printed when
you are setting originals on the
exposure glass (contact glass).
Program Clear Modes
Auto Cycle
Proof
Print
Enter
Start
Clear/Stop
TPES040N
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES050N
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES150N
Program Clear Modes
Auto Cycle
Proof
Print
Enter Start
Clear/Stop
TPES070N