Ricoh Priport JP5000 - Manual (Page 333)

On Line Printing
81
1
Auto On Line
You can select whether the machine
automatically switches to On Line
mode when it receives data from a
PC.
Preparation
• The default setting for On Line
mode is On. However, you can
change the setting to Off if re-
quired.
• You can press the
{{{{Auto On Line}}}}
key to switch Auto On Line on
or off. If the Auto On Line indi-
cator is lit, Auto On Line is ac-
tive. If the indicator is off, Auto
On Line is inactive.
• When the Auto On Line indica-
tor is lit, Auto On Line has pri-
ority when data is received
from a PC. If you want to pre-
vent the machine from inter-
rupting a print job when it
receives data from a PC, press
the
{{{{Auto On Line}}}} key so the
Auto On Line indicator goes off
and Auto On Line becomes in-
active.
AAAA
Press the
{{{{Auto On Line}}}} key.
Skip Feed Edge Erase
Over lay
Make-Up
Stamp
Image Density
Lighter
Darker 2
Darker 1
Normal
Economy Mode
Original Storage Job Separator
Auto On Line
On Line
ZDZS160N