Ricoh Priport JP5000 - Manual (Page 378)

Optional Functions
126
2
When you use thin originals, place
one original at a time in the document
feeder or place them on the exposure
glass.
The first 8mm, 0.32", of the leading
edge and the last 2mm, 0.08" of the
trailing edge cannot be printed. Make
sure the leading edge margin is at
least 8mm, 0.32", and the trailing edge
margin is at least 2mm, 0.08".
Do not stack originals above the limit
mark.
Placing Originals
AAAA
Adjust the guide to the original
size.
BBBB
Insert the aligned originals face
up into the document feeder.
Note
❒ To avoid originals misfeeding,
fan the originals before placing
them in the document feeder.
Limitation
❒ Approximately 50 originals
(80g/m 2 , 21 lb) can be inserted
at one time in the document
feeder. The first (top) original
will be fed first.
Note
❒ To avoid jamming, fan the orig-
inals before placing them in the
document feeder.
❒ The guides must fit snugly
against both sides of the stack.
CCCC
Adjust print settings as necessary,
and then press the
{{{{Start}}}} key.
DDDD
Make your prints.
Note
❒ If the next original has been
placed in the document feeder
before the machine stops, that
original is fed automatically
and a trial print is delivered to
the paper delivery tray after the
print of the first original is com-
pleted. Check the image posi-
tion on the trial print of the next
original. If necessary, make
proof prints using the
{{{{Proof}}}}
key to check the image position
again.
ZDCH120E