Ricoh Priport JP5000 - Manual (Page 268)

Operation
16
1
Setting Up The Paper Delivery
Tray
AAAA
Raise the paper delivery tray
slightly, and then gently lower it
with your hand.
BBBB
Raise each paper delivery side
plate, and then grasp the side
plate knobs and move the paper
delivery side plates to match the
print paper size.
Note
❒ The inside of the plates should
correspond to the paper size.
When you use thick paper (128 g/m 2
to 209.3 g/m 2 , 34 lb to 55.6 lb)
A Adjust the side plates to match
the paper size scale on the
main frame side.
When you use standard paper
(47.1 g/m
2 to 105 g/m 2 , 12.5 lb to
28 lb)
A Adjust the side plates to match
the paper size scale on the end
plate side.
CCCC
Lower or lift the paper alignment
wings by turning the left and
right knobs.
Note
❒ When the guides are up, you
might not be able to load the
unit to full capacity (1,000
sheets) depending on the paper
you are using.
❒ Lift the paper alignment wings
if B5
L prints are curled.
When you use 81.4 g/m 2 , 21.6 lb
or thicker paper
A Lower the paper alignment wings.
When you use 81.4 g/m 2 , 21.6 lb
or thinner and B5 or smaller paper
A Lower the paper alignment wings.
When you use 81.4 g/m 2 , 21.6 lb
or thinner and A4, 8 1 /
2
× 11" or
larger paper
A Lift the paper alignment wings.
ZBHH050E
ZDZH180E