P.26 “adjusting print, Image density, Y. see – Ricoh Priport JP5000 User Manual
Page 48: P.26 “adjusting print image, Density, Adjusting print image density, Before making a master after making a master, P.26 “adjusting print image densi, P.26 “adjusting print image density, P.26 “adjusting print im
OPERATION
26
1
Adjusting Print Image Density
You can adjust the print image densi-
ty to suit your needs. There are two
ways to do this:
❖
❖
❖
❖
Before Making A Master
Use the
{
Image Density
} key.
❖
❖
❖
❖
After Making A Master
Use the
{
Speed
} keys.
Before Making A Master
A
Press the
{{{{
Image Density
}}}} key to ad-
just the image density.
B
Press the
{{{{
Start
}}}} key.
After Making A Master
A
To increase the image density,
press the
{{{{W
W
W
W}}}} key. To reduce the
image density, press the
{{{{V
V
V
V}}}} key.
Note
❒ The faster the printing speed be-
comes, the lighter the printing
density is. If you want darker
prints, decrease the printing
speed.
Stamp
Make-Up
Overlay
Edge Erase
Skip Feed
Economy Mode
Tint
Darker 2
Darker 1
Normal
On Line
Job Separator
Lighter
Image Density
TPES340N
Program
Clear Modes
Auto Cycle
Proof
Enter
Start
Clear/Stop
TPES050N
Combine
Class
Slow
Fast
Speed
1
TPES100N