Ricoh Priport JP5000 - Manual (Page 347)

Make-up Printing
95
1
❒ To change the value entered,
press the
{{{{Clear/Stop}}}} key and en-
ter the new value.
JJJJ
After you have finished designat-
ing modes for all the command
sheets, select [Outside Area] with
the [
← ← ← ←] [→ → → →] or {{{{~ ~ ~ ~}}}} {{{{} } } }}}}} keys.
KKKK
Select the mode for the outside
area with the [
← ← ← ←] [→ → → →] or {{{{~ ~ ~ ~}}}} {{{{} } } }}}}}
keys.
LLLL
Press the [OK] key.
Note
❒ When you select Photo mode
for both inside and outside ar-
eas, you cannot select different
dot patterns and contrast.
❒ When you want to confirm your
settings, press the
{{{{Make-Up}}}} key
twice. Then press the [OK] key
repeatedly until the panel dis-
play reaches the setting you
want to confirm.
MMMM
If you have selected Photo mode,
select the dot pattern and the con-
trast with the [
← ← ← ←] [→ → → →] or {{{{~ ~ ~ ~}}}} {{{{} } } }}}}}
keys.
Note
❒ Four dot patterns settings are
available:
• Setting 1: clearest
• Setting 2: clearer than setting 3
• Setting 3: clearer than setting 4
• Setting 4: clearer than the
standard setting
NNNN
Press the [OK] key.