Ricoh Priport JP5000 - Manual (Page 449)

Maintaining Your Machine
197
6
Maintaining Your Machine
To maintain high print quality, clean
the following parts and units regular-
ly.
❖ ❖ ❖ ❖ Cleaning the machine
Wipe the machine with a soft,
damp cloth. Then wipe it with a
dry cloth to remove the water.
Important
❒ Do not use chemical cleaner or or-
ganic solvents, such as thinner or
benzene. If they get into the ma-
chine or melt plastic parts, a failure
might occur.
❒ Do not clean parts other than those
specified in this manual. Such
parts should be cleaned by your
service representative.
Cleaning the Main Frame
Cleaning the exposure glass
AAAA
Lift the platen cover or document
feeder.
BBBB
Clean
A A A A and B B B B.
Cleaning the platen cover
AAAA
Lift the platen cover.
BBBB
Clean the platen cover with a
damp cloth and wipe it with a dry
cloth.
Note
❒ If you do not clean the platen
cover, marks on the cover will
be printed.
Cleaning the paper feed roller (Paper
feed tray)
AAAA
Wipe dust off the paper feed roll-
er with a damp cloth, and then
wipe it with a dry cloth.
Note
❒ If you do not clean the paper
feed roller, paper misfeeds tend
to occur.
ZDCH130E
AM1P0100
TPEH120E