Ricoh Priport JP5000 - Manual (Page 45)

Loading Paper On The Paper Feed Tray
23
1
Changing The Paper Size
A
Remove the paper from the paper
feed tray.
The paper feed tray will lower.
B
Grasp the side/end plate knob
and adjust the paper feed side/
end plates to match the paper
size.
C
Place the paper on the paper feed
tray.
Note
❒ Correct any paper curl before
setting the paper.
❒ Make sure that the side/end
plates touch the paper lightly.
❒ Make sure that the paper size
and direction in the panel dis-
play correspond with the actual
paper size and direction set on
the paper feed tray.
❒ If you set a different kind of pa-
per, do not forget to select the
appropriate paper type with the
[Ppr. Type] key. See
⇒
P.42
“Printing On Various Kinds Of
Paper”.
D
Adjust the paper delivery side
plates and if necessary, pull out or
in the paper delivery tray and ad-
just the end plate. See
⇒
P.16
“Setting Up The Paper Delivery
Tray”.
TPEY997E
TPEY030E
TPEY040E