Ricoh Priport JP5000 - Manual (Page 382)

Optional Functions
130
2
Color Printing Using the Optional Color
Drum
Color drum units are available as op-
tions in addition to the standard black
unit. For making color prints, a sepa-
rate drum unit is necessary for each
color.
Note
❒ If the ink on the color drum dries,
use the Quality Start mode. See
p.76 “Quality Start Mode”.
Making Color Prints
AAAA
Make sure that the color drum in-
dicator is lit.
BBBB
Press the
{{{{Start}}}} key.
CCCC
Check the image position on the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the [Image
= = = =]
key. See p.24 “Adjusting the Po-
sition of Printed Images”.
DDDD
Make your prints.
Changing the Color Drum Unit
AAAA
Open the front door.
BBBB
Lower the drum unit lock lever
(B1).
Note
❒ Make sure the green light be-
side the drum unit lock lever is
on before sliding out the drum.
If the light is off, close the front
door, wait for five seconds, and
then open.