Operation, Printing paper – Ricoh Priport JP5000 User Manual
Page 33
11
1. OPERATION
Printing Paper
The following types of print paper are not recommended for this machine.
• Paper smaller than 70 mm
×
148 mm, 2.8"
×
5.9"
• Paper larger than 297 mm
×
432 mm, 11.6"
×
17.0"
• Paper heavier than 209.3 g/m
2
, 55.6 lb
• Paper lighter than 47.1 g/m
2
, 12.6 lb
• Roughly-cut paper
• Paper of different thickness in the same stack
• Envelopes heavier than 85 g/m
2
, 22 lb.
• Folded, curled, creased, or damaged paper
• Torn paper
• Slippery paper
• Rough paper
• Paper with any kind of coating (such as carbon)
• Short grain paper
• Thin paper that has low stiffness
• The following types of envelopes
If you make a print on rough grain paper, the copy image might be blurred.
You can use A3 (297
×
420 mm) or 11"
×
17" originals or printing paper. When
you want to print the entire image of an A3, 11"
×
17" original, select Reduce
mode because the maximum print areas are as follows:
• Metric version: 290
×
409 mm, 11.4"
×
16.1"
• Inch version: 290
×
419 mm, 11.4"
×
16.4"
When you use A3, 11"
×
17" and 209.3 g/m
2
, 55.6 lb paper, slow the printing
speed down to setting 1, 2, or 3.