Ricoh Priport JP5000 - Manual (Page 324)

Operation
72
1
Programs
You can store up to 9 frequently used
print job settings in machine memory
and recall them for future use.
Note
❒ Stored programs are not cleared
when you turn off the main switch.
❒ Stored programs cannot be delet-
ed. If you want to change a stored
program, overwrite it.
Storing a Program
AAAA
Make the print settings you want
to put into memory.
BBBB
Press the
{{{{Program}}}} key.
CCCC
Select [Store] with the [
→ → → →] or {{{{} } } }}}}}
key.
DDDD
Press the [OK] key.
Note
❒ The program numbers (1 to 9)
will be displayed in the panel
display.
❒ If a user program has been pro-
tected, that program number
will not appear in the panel dis-
play. To change a protected user
program, see p.73 “Protecting a
Program”.
❒ If all the user programs have
been protected, you cannot
store any settings. Press the
[Cancel]
key.
EEEE
Select the program number you
want to store the settings in with
the [
← ← ← ←] [→ → → →] or {{{{~ ~ ~ ~}}}} {{{{} } } }}}}} keys.
Note
❒ You can also select the program
number with the number keys.
FFFF
Press the [OK] key.
Note
❒ If this program number is al-
ready used, the machine asks
whether you wish to overwrite
it or not. Press the [Yes] or [No]
key.