Ricoh Priport JP5000 - Manual (Page 393)

User Tools Menu
141
4
User Tools Menu
Reference
For accessing the user tools, see p.139 “Accessing the User Tools”.
1. System
No. Mode Description
1 Auto Reset The machine returns to its initial condition automatically after
your job is finished. The automatic reset time can be set from 1 to
5 minutes or off (0 minutes).
Note
❒ Default: Off
2 R. Cntr. Display Use to display the total number of masters and prints.
Note
❒ A trial print delivered to the paper delivery tray after press-
ing the {{{{Start}}}} key will not be counted.
3 Reset R. Counter Choose whether the total number of masters and prints is reset.
Note
❒ Default: Not clear
4 mm/inch Choose the units of measurement shown on the panel display.
Note
❒ Default:
• Metric version: mm
• Inch version: inch
5 Language on LCD The language used for panel display messages can be selected.
Note
❒ Default: English
6 Time Setting Use to set the machine's internal clock.
Note
❒ The clock must be adjusted if you change the clock to daylight
saving time/summer time, or return to standard time.
Reference
For setting the clock, see p.153 “1-6 Time Setting”.