Ricoh Priport JP5000 - Manual (Page 94)

OPERATION
72
1
Program—Storing Your Print Settings In
Memory
You can store up to 9 frequently used
print job settings in machine memory
and recall them for future use.
Note
❒ The stored programs are not
cleared when you turn off the main
switch.
❒ The stored programs cannot be de-
leted. If you want to change a
stored program, overwrite it.
Storing Your Settings
A
Set the print settings you want to
put into memory.
B
Press the
{{{{
Program
}}}} key.
C
Select [Store] with the [
→ → → →
] or
{{{{} } } }}}}}
key.
D
Press the [OK] key.
Note
❒ The program numbers (1 to 9)
will be displayed in the panel
display.
❒ If a user program has been pro-
tected, that program number
will not appear in the display.
To change a protected user pro-
gram, see
⇒
P.73 “Protecting A
Program”.
❒ If all the user programs have
been protected, you cannot
store any settings. Press the
[Cancel] key.
E
Select the program number you
want to store the settings in with
the
[
← ← ← ←
] , [
→ → → →
] ,
{{{{~ ~ ~ ~}}}}, or {{{{} } } }}}}} key.
Note
❒ You can also select the program
number with the Number keys.
F
Press the [OK] key.
Note
❒ If this program number is al-
ready used, the machine asks
whether you wish to overwrite
it or not. Press the
[Yes] or [No]
key.
Program Clear Modes
Auto Cycle
Proof
Print
Enter
Start
Clear/Stop
TPES190N
TPES570E
TPES530E