Ricoh SP3510SF - Manual (Page 119)

Placing Originals
This section describes the types of originals you can set and how to place them.
About Originals
This section describes the types of originals that can be placed and the parts of the original that are
unscannable.
Recommended size of originals
This section describes the recommended size of the original.
Exposure glass
Up to 216 mm (8.5") in width, up to 297 mm (11.7") in length
ARDF/ADF
• Paper size: 140 to 216 mm (5 1 /
2
" to 8 1 /
2
") in width, 140 to 356 mm (5 1 /
2
" to 14") in
length
• Paper weight: 52 to 105 g/m 2 (13.8 to 28.0 lb.)
• Only 1 sheet of an original can be placed on the exposure glass at a time.
• In the ARDF or ADF, up to 50 sheets or 35 sheets of originals can be placed at once, respectively
(when using paper weighing 80 g/m 2 , 20 lb.).
Types of originals not supported by the ARDF or ADF
If placed in the ARDF or ADF, the following types of original might be damaged or become jammed, or
result in gray or black lines appearing on prints:
• Originals larger or heavier than recommended
• Stapled or clipped originals
• Perforated or torn originals
• Curled, folded, or creased originals
• Pasted originals
• Originals with any kind of coating, such as thermal fax paper, art paper, aluminum foil, carbon
paper, or conductive paper
• Originals with perforated lines
• Originals with indexes, tags, or other projecting parts
Placing Originals
117