Ricoh SP3510SF - Manual (Page 286)

Specifies whether the same printer/LAN-Fax driver can be used for multiple machines or not
under USB connection.
Default: [Off]
• On
The same printer/LAN-Fax driver you have installed in your computer can be used with
any machine other than the one originally used for installation, if the machine is of the
same model.
• Off
You must install the printer/LAN-Fax driver separately for individual machines, because
the machine other than the original will be recognized as a new device upon USB
connection.
Auto Continue
Sets the machine to ignore an error with paper size or type and continue printing. The printing stops
temporarily when an error is detected, and restarts automatically after about ten seconds using the
settings made on the control panel.
Default: [Off]
• On
• Off
Toner Saving
Sets the machine to print using a reduced amount of toner (for prints made by the copier function
only).
Default: [Off]
• On
• Off
Supplies Status
Displays information about consumables. To replace the fusing unit, transfer roller, or paper feed
roller, contact your sales or service representative.
• Print Cart.:
Displays the remaining amount of toner.
(New), , , , ,
(Needs replacing)
• Fusing Unit:
Displays the remaining life of the fusing unit.
(New), , , , ,
(Needs replacing)
• Transfer Roller:
7. Configuring the Machine Using the Control Panel
284