Ricoh SP3510SF - Manual (Page 409)

Message Causes Solutions
Set Original to ADF
Cannot use exposure
glass
with set. in [Scan
Size].
Scanning could not be
performed because the originals
were not placed in the ARDF or
ADF, even though the machine
is set to scan originals larger
than A4/Letter size.
• Use the ARDF or ADF, even when
scanning A4/Letter or smaller size
originals.
• If you need to use the exposure glass,
set A4/Letter or smaller size in [Scan
Size] under scanner settings, and then
try again. See p.263 "Scanner
Settings".
Sort Copy was
Cancelled
The machine's memory reached
capacity while originals were
being scanned from the ARDF
or ADF to perform sort copying. Press [Exit] to print the originals that were
successfully scanned into memory. Then,
copy again the originals left in the ARDF or
ADF.
TX Comm. Error
A transmission error occurred,
and the fax could not be
transmitted correctly.
If the [Auto Redial] setting is enabled, the
machine will redial the number and try
again. If all attempts fail, or if the machine
is in Immediate Transmission mode, the fax
will not be transmitted. Try the operation
again.
Unavailable Paper
Type
2-sided copy could not be
performed because the tray
does not contain the valid type
paper, which are thin, plain,
recycled, color, preprinted,
prepunched, thick paper 1, or
letterhead.
• Specify the tray containing the valid
type paper in the [Select Paper]
setting. See p.257 "Copy Settings".
• Specify the valid paper type for the
tray selected for printing copies. See
p.279 "System Settings".
Unsupported Device
Please Remove
The Scan to USB function failed
because a USB device other
than a USB flash disk or a USB
flash disk with an unsupported
file system was used.
Use a USB flash disk that is compatible
with the Scan to USB function.
Unsupported Device
Press Clear key
The Scan to USB function failed
because a USB device other
than a USB flash disk or a USB
flash disk with an unsupported
file system was used.
Use a USB flash disk that is compatible
with the Scan to USB function.
Error and Status Messages on the Screen
407