Ricoh SP3510SF - Manual (Page 61)

Country code
The country code selected here is used for configuring the time and date display formats, and the
settings related to fax transmissions with appropriate default values for the country of use.
1. Press the [ ] [ ] keys to select the required language, and then press the [OK] key.
2. Press the [ ] [ ] keys to select [Number:], and then enter the user fax number (up to 20
digits).
3. Press the [ ] [ ] keys to select [Name:], enter the user name (up to 20 characters), and
then press the [OK] key.
4. Press the [ ] [ ] keys to select the required country code, and then press the [OK] key.
• You can change the settings configured during the Initial Setup later under [Admin. Tools]. In
addition, you can set the machine's time and date under [Admin. Tools].
• When the [Print Fax Header] setting under fax transmission settings is turned on, the registered user
fax number, user name, and time and date of transmission appear on the header of every fax you
send.
• For details about entering characters, see p.123 "Entering Characters".
• For details about [Admin. Tools], see p.298 "Administrator Settings".
• For details about [Print Fax Header], see p.267 "Fax Transmission Settings".
Changing Operation Modes
You can switch between copier, scanner, and fax modes by pressing the corresponding keys.
Copier mode
Press the [Copy] key to activate copier mode. While in copier mode, the [Copy] key lights up.
CMF131
Installing the Machine
59