Using the fax function, The screen in fax mode – Ricoh SP3510SF User Manual
Page 201
6. Using the Fax Function
This chapter describes the fax functions.
The Screen in Fax Mode
This section provides information about the screen in fax mode.
By default, the display shows the copier screen when the machine is turned on.
If the copy or scanner screen is shown on the display, press the [Facsimile] key on the control panel to
switch to the fax screen.
CMF133
Screen in standby mode
CMF102
1. Current status or messages
Displays the current status or messages.
2. Current settings
Displays the current density and resolution settings.
3. Selection key items
Displays the functions you can use by pressing the corresponding selection keys.
4. Current date and time
Shows the current date and time.
• The machine's default mode at power on can be specified in the [Function Priority] setting under
[Admin. Tools].
199